Bridge mit dummy interface: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Die Seite wurde neu angelegt: „=Muss in die /etc/network/interfaces= <pre> auto dummy0 iface dummy0 inet manual pre-up modprobe dummy numdummies=1 auto vmbr0 iface vmbr0 inet static add…“ |
|||
| Zeile 12: | Zeile 12: | ||
bridge_fd 5 | bridge_fd 5 | ||
bridge_stp no | bridge_stp no | ||
post-up iptables -t nat - | post-up iptables -t nat -A POSTROUTING -s 10.0.12.0/24 -j MASUQERADE | ||
post-up echo 1 > /proc/sys/net/ipv4/ip_forward | post-up echo 1 > /proc/sys/net/ipv4/ip_forward | ||
</pre> | </pre> | ||
=Danach= | =Danach= | ||
*ifup -v vmbr0 | *ifup -v vmbr0 | ||
Version vom 5. Dezember 2023, 10:02 Uhr
Muss in die /etc/network/interfaces
auto dummy0
iface dummy0 inet manual
pre-up modprobe dummy numdummies=1
auto vmbr0
iface vmbr0 inet static
address 10.0.12.1
netmask 255.255.255.0
bridge_ports dummy0
bridge_fd 5
bridge_stp no
post-up iptables -t nat -A POSTROUTING -s 10.0.12.0/24 -j MASUQERADE
post-up echo 1 > /proc/sys/net/ipv4/ip_forward
Danach
- ifup -v vmbr0