Quelltext der Seite AP nmcli

=Installation=
;Wir brauchen einen NetworkManager und eine Light Version von Name und DHCP Server
*apt update
*apt install dnsmasq

=Host AP aktivieren=
*nmcli dev wifi hotspot ifname wlan0 ssid test password "test1234"

=Host IP Adresse setzen=
*nmcli connection modify Hotspot  ipv4.method manual ipv4.addresses 192.168.178.1/24
=Wie heist der AP?=
*nmcli connection show                                                                                                                               
 NAME                UUID                                  TYPE      DEVICE 
 Wired connection 1  04ce7d80-e44b-4a8d-9305-b2ad8c72a590  ethernet  eth0   
 Hotspot             64b34b3b-46af-44ba-80b3-e4f5119d85ee  wifi      wlan0*

=Aktivieren=
*nmcli connection down  Hotspot ; nmcli connection up Hotspot 
 Connection 'Hotspot' successfully deactivated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/4)
 Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/5)
=Netzwerkarbeiten[Bearbeiten]=
==Alles aus diesem LAN wird maskiert==
*iptables -t nat -A POSTROUTING -s 192.168.178.0/24 -j MASQUERADE

==Forwarding einschalten==
*sysctl -w net.ipv4.ip_forward=1
=Installation dnsmasq=
*[[dnsmasq]]